Pelican Building Contractors Ltd – Commercial Flooring
The project previously offices which would eventually be an optical production centre and opticians open to the public, consisted of several rooms that had be made into one large space.
The new open area needed levelling due to differing floor heights.
The existing vinyl and latex were removed exposing rough pitted concrete. The area was ground back before a coat of DCP DPM epoxy resin priming system, was applied to the total floor area, incorporating a heavy scatter of 0.6 to 1.2mm quartz aggregate. A 7-15mm DCP Cemflow pigmented screed in red was laid followed by 2 coats of DCP Setseal 6, resin based clear sealer. 54 linear metres of saw cut 8mm x 6mm expansion joints were mirrored through then knocked out and infilled with jointing compound.
The job was completed in just 4 days creating a level hard wearing floor.