Watertight Management – Engineering & Manufacturing Flooring
PSC Flooring were called in to look at a 280 square metre area for Watertight Management, a nationwide, specialist water and wastewater contractor based in Bromsgrove.
Client Brief and Recommendations
The 280 square meter area was divided into a vehicle workshop, offices, canteen and toilets. Additionally, the client wanted a very hard, long lasting, smooth resin floor in matt finish. Therefore, PSC recommended a 6mm Resdev Pumadur MD polyurethane screed.
In Preparation
In Preparation for the 6mm MD Polyurethane Screed, the floor was ground back using a captive diamond grinding machine and vacuumed clean of all dust and debris. Moreover, 6mm x 6mm saw cuts were then made around drains, door entrances and where necessary to toe in and anchor screed. Then, repairs were made to damaged void to perimeter of floor area, knocking out failed concrete where necessary and infilling using polyurethane mortar compound. After that, the areas were then primed using and OCS oil tolerant epoxy resin primer, scattered whilst wet with a quartz aggregate.
280 sq mtrs of 6mm Resdev Pumadur MD polyurethane screed
Once the primer coat with scatter was fully dry, a nominal 6mm MD polyurethane screed in the clients chosen finish – smooth, matt, Dark Grey, was laid to the vehicle workshop, offices, canteen and toilet areas. Then, finally once the screed was dry approximately 50 linear meters of expansion joints were then recut, knocked out and infilled with polyurethane jointing compound.
Completed in just 4 days on time and within budget.
Click images below to view larger version :
