Case
Studies

Roger Dyson Ltd – Stoke Prior – Vehicle Workshop Flooring

If you like what you see call us today for a FREE SITE SURVEY on 01562 702047

Its always great to be called in to look at additional work from an existing client. In this case long term client Roger Dyson Ltd asked us to look at a 245 square metre workshop over in Stoke Prior. The space had been previously used for manufacturing and the floor was particularly dirty.

Client Brief and Recommendation

The client was looking for a clean and easy to keep clean floor that would be hardwearing. At the site visit it was noted there was extensive build-up of swarf, dirt and grease that would need to be removed before the recommended coating system was laid. A two coat high build system is ideal for workshops as when cured the surface is extremely hardwearing Impervious to oil and grease, easy to clean and budget friendly.

Roger Dyson Ltd– Stoke Prior - Vehicle Workshop

In Preparation

To adequately prepare for the suggested two-coat High Build Epoxy Resin Flooring System, it was essential to thoroughly prepare the existing concrete floor. This was accomplished using our captive Husqvarna diamond grinders to eliminate any dirt and ensure proper adhesion. The edgework was meticulously cleaned with a fully enclosed handheld 110v diamond grinder, followed by a comprehensive vacuuming of the entire area to remove all residues and dust. Additionally, repairs were conducted on any localised damage, including cracks and holes, utilising epoxy mortar compound and epoxy resin screed as necessary.