Industrial Flooring Expert
Book A Free Site Survey
Call us now
01562 702047

Cementitious Pump Screeds from PSC Flooring

High Performance and Heavy Duty Flooring.

Our Cementitious Pump Screeds can be laid to a thickness of between 6mm to 20mm and up to 2000 square meters per day. This product is ideal for renovating old or badly damaged floors within the shortest time possible. The floor is very quick drying and allows foot traffic within a few hours of it being laid down. Vehicle traffic is able to be received after 24 hours.

PSC Flooring’ Cementitious Pump Screeds

Screeds offer a quick, high performance and heavy duty flooring which is able to withstand the harshest of environments.

Our Cementitious Pump Screeds have been used within a variety of different industries, including:

● Engineering facilities

Warehousing

Food Processing

● Manufacturing

Case Study

An example application of our Cementitious Pump Screeds is at DTR VMS Ltd in Trowbridge,Wiltshire. The company had outgrown their previous facility in Chippingham and needed to relocate to a much larger facility. Their new premises was very run down and required extensive refurbishment, including the 8000 square metre concrete floor. The flooring was very worn and uneven, which was a problem for DTR VMS Ltd as they required a very hard wearing, flat, durable floor surface to withstand high levels of forklift traffic and production usage. Speed of installation was the key factor, so PSC Flooring Ltd specified a 7mm heavy duty, cementitious pump screed, followed by two coats of HB epoxy resin in order to meet the brief and complete the installation in a very tight timescale.

The Procedure:

● All the floors were heavily shot-blasted and all areas were thoroughly repaired, swept and vacuumed cleaned

● All expansion joints were recut and repaired using epoxy mortar compound.

● An epoxy resin primer was then laid to the total floor area.

● A 7mm heavy duty cementitious pump screed: was laid with approximately 2000 square

metres laid per day.

● Once the pump screed was dry and all expansion joints reintroduced, then two coats of HB epoxy resin was laid, using light grey for all production areas.

The project was completed in 4 weeks, on time and in budget, providing DTR VMS Ltd with a fully refurbished, very durable, hard wearing surface that can be used for many years to come.

Contact Us

For competitive pricing, unbeatable products and excellent service, look no further than PSC. As leading industrial flooring contractors, we can meet all of your screed flooring requirements especially when it comes to engineering and manufacturing flooring. To find out more about how we can help your business, please visit our website or contact us directly:

Tel: 01562 702047

Fax: 01562 750988

Email: us@protectivesurfacecoatings.co.uk

You might also like to read our previous blog about Resin Flooring Experts information too.

Speak to a member of our team
Call: 01562 702047